Painting your walls perfectly can change the appearance and even the ambiance of any given room in your home. While this may sound quite simple, there are specific approaches that can lead to the desired result instead of a haphazard appearance of the painted surface.
The following is a look at the top five methods of painting walls to make sure you get the best look that complements your living space.
1. Prep Work
That is why one has to prepare the surface of the wall properly before engaging in painting activities. This includes baseboard trim such as washing the walls to make them free of dirt, dust, and grease, painting over any cracks or holes, and sanding them until smooth.
Further, it is advisable to cover such areas as baseboard trim and door frames with painter’s tape to ensure sharp demarcation lines and avoid paint dripping onto neighboring surfaces.
2. Use High-Quality Tools and Materials
Choosing quality paint brushes, rollers, and even paint also determines the quality of the work to be delivered. Use brushes with synthetic materials to apply latex paint and natural hair for oil-based paints, as they provide better coverage and a smoother finish.
Likewise, select the best type of paint that is suitable for the surface to paint, including walls, ceilings, or even the baseboard trim. It also means that the right tools and materials lead to enhanced adhesion, coverage, and longevity of your paint coat.
3. Cutting-In Technique
It is critical to perfect the cutting-in process in order to provide well-defined edges around corners, ceilings, and baseboard trim. First, with a smaller brush, paint these areas carefully, outlining them in small portions at a time.
Once the edges are painted, paint the rest of the wall using a bigger brush or roller, and make sure that the paint flows smoothly. Proper time taken in cutting-in results in a neat cut-in area without jagged lines or blurs.
4. Proper Paint Application
Regarding the painting technique, especially when applying paint to walls, make sure that smooth and overlapping strokes are made to avoid forming black lines or roller marks. To do that, begin with a ‘W’ or ‘M’ pattern across the surface to spread the paint and then use a vertical pattern to complete the rest of the surface painting.
Do not apply much pressure to the surface, as it may lead to the formation of drips or lines on the painted surface. Further, one must work in small areas when applying so that they do not dry out, which leads to seams or lap marks along the baseboard trim.
5. Finishing Touches
After the paint has had a chance to dry, it is important to look for any flaws or missed areas and repaint them if necessary. Carefully take off the painter’s tape to avoid pulling off the dried paint as well, and then use sandpaper to level out any uneven surfaces on the painted wood.
Lastly, discuss the application of a sealer or putty, especially if there are areas of high traffic or if the rooms are exposed to excess steam, since this will help in ensuring your new paint stays fresh for a longer duration.
